What to Know
- Important first step: Make sure your TV can support Bluetooth. Otherwise, look for a 3.5mm AUX, RCA, or optical audio output.
- Get a Bluetooth transmitter, connect it to a power source, and then pair your Bluetooth headphones or speakers.
This article explains how to add Bluetooth to most television models. Instructions apply to most modern televisions .
Take inventory of Your television receiver
Before you get besides deep into this work, you ‘ll want to know what options your television can support. The first matter to do is check to see whether your television already has Bluetooth built-in. Some TVs have this, and if yours does, you may not need fancy adapters.
If you have a Bluetooth-enabled television receiver and are connecting to speakers or headphones that do n’t use Bluetooth, you can use a Bluetooth receiver like the Harmon Kardon Bluetooth adapter. If you ‘re ready with Bluetooth-enabled devices, you can jump straight into connecting to your television using Bluetooth .
The other significant thing to note is the diverse audio output options your television supports. If it does n’t have built-in Bluetooth, you ‘ll probable be relying on a 3.5mm AUX, RCA, or ocular sound recording output. You ‘ll need to confirm which ports are available to you when picking an audio solution then you get one that ‘ll work with your television .
Using a Bluetooth Transmitter for television receiver
If you ‘ve settled on adding a Bluetooth vector to your television to handle radio audio from your television receiver to a pair of headphones or speakers, the basics are fairly childlike .
You ‘ll want to start by getting a Bluetooth vector that ‘ll work with your television. Something like Avantree’s Audikast is a versatile option, as it can transmit to two devices simultaneously, supports broken latency sound recording, and can take audio inputs from USB, ocular, RCA, and 3.5mm AUX outputs on your television receiver or computer monitor .
You can besides find childlike and cheaper transmitters that use 3.5mm jacks, like the Trond Bluetooth Transmitter on Amazon .
- In most cases, you ‘ll need to connect the vector to a ability source unless it has its own battery. then you ‘ll have to connect it to one of your television receiver ‘s audio outputs.
- To pair Bluetooth headphones or speakers, you ‘ll want to put them close to the transmitter and set each device to pairing mode. Activating pairing mode will be unlike for each device, indeed be certain to check the specific instructions included with your vector, speaker, or headphones .
once paired, you ‘re ready to listen .
You may need to unplug the adapter to resume using your television ‘s built-in speakers, though this depends on your television receiver and which audio port you use .
It very is that childlike to set up, but getting a good experience out of a Bluetooth arranger for your television can be more complicate. Lifewire has reviewed a numeral of adapters that may help you get a higher quality, latency-free experience .
potential Issues and Alternatives
Bluetooth has its faults and limitations. It may seem like an attractive option to set up radio receiver speakers for television receiver, but it ‘s not arrant, and other solutions may provide a a lot better experience :
- Audio Sync: Many Bluetooth TV adapters will support a limited number of devices at a time. Some support two pairs of headphones, so you and someone else can listen at the same time. While you could use this feature to try setting up two Bluetooth speakers, you may run into issues with the audio being out of sync, and you may not get a proper stereo sound unless the speakers are designed to work together specifically for that purpose.
- Audio Quality: Audio quality over Bluetooth is generally not as good as other solutions, like wired connections or other wireless audio types. How much quality is lost depends on the Bluetooth codecs supported both on the transmitting and receiving ends.
- Latency: Depending on the devices you use, there could be significant latency, meaning the audio you hear may lag behind the imagery on TV.
- Wiring: If you’re thinking of using Bluetooth because you want to avoid lots of wires, it’s also worth noting you’ll likely be wiring a Bluetooth transmitter from the back of your TV to somewhere around it where its signal isn’t blocked by the TV. In other words, you’ll still be dealing with wires.
Read more: How to register as a VIP in GTA Online
With all that in mind, you may consider something like a sound stripe to upgrade your audio setup while besides supporting a completely radio receiver besiege sound apparatus with a seamless connection to remote television receiver speakers. Or, you have the choice of using a device like a Roku stream player, many of which support wireless audio when a pair of headphones is plugged into the remote control control .