Windows Can’t See Other Computers on a Network
Users are experiencing issues with displaying neighboring computers on the workgroup LAN starting from Windows 10 1703. After installing this ( or a newer version of Windows 10 ), your computer may stop seeing neighboring computers on the net. An mistake occurs when you try to view the device tilt in the network by clicking the Network picture in File Explorer :
Network discovery is turned off. Network computers and devices are not visible. Please turn on network discovery in Network and Sharing Center.
When trying to show a list of computers in the network environment with the
net view command, an mistake appears :
System error 6118 has occurred. The list of servers for this workgroup is not currently available.
Check the follow settings to show the net devices on your Windows network :
Go to Control Panel – > Network and Sharing Center – > Change advanced sharing settings ( you can run the command :
control.exe /name Microsoft.NetworkAndSharingCenter /page Advanced ) .
Make surely that the follow options are checked in the Private net visibility section :
- Turn on network discovery + Turn on automatic setup of network connected devices;
- Turn on file and printer sharing;
- Allow Windows to manage homegroup connections (recommended).
then enable the following options in the All networks section :
- Turn on Public Folder sharing so anyone with network access can read and write files in the Public folders (optional);
- Turn off password protected sharing (if you trust all the devices in your network); frankincense, you can open anonymous net access to your calculator. thus, when you enable this option, you must correctly set the permissions on the shared network folders and printers .
- If there are legacy network devices in your network (old Windows version, Samba shares, NAS devices), enable the option “Enable file sharing for devices that use 40-bit or 56-bit encryption”.
then go to Settings – > Network and Internet – > Ethernet ( or select Wi-Fi, if you are connected to a local network through a radio connection ). Click the net icon and verify that the Make this PC discoverable option is enabled .
Flush the DNS cache on the computer :
To enable the Network Discovery dealings in Windows Defender Firewall, you must run the trace control in the raised command prompt :
netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes
Or you can enable the network discovery traffic in Windows Firewall with the PowerShell
Get-NetFirewallRule -DisplayGroup "Network Discovery" -Enabled True -Action Allow -Direction Inbound
besides, you can manually enable the Network Discovery protocol for at least the Private net in the Windows Defender Firewall settings ( Control Panel\All Control Panel Items\Windows Defender Firewall\Allowed apps ) .
In some cases, Windows computers may not be displayed in the network environment due to incorrect workgroup settings. Try to rejoin this computer in the workgroup. Go to the Control Panel -> System and Security -> System -> Change Settings -> Network ID .
In the Join Domain or Workgroup Wizard that opens, blue-ribbon : This computer is separate of a business network – > My ship’s company uses a network without a domain – > enter your workgroup name. After that, you need to restart the calculator .
Make certain that the lapp workgroup diagnose is set for all devices on the local network. You can use PowerShell to find out if your calculator is in a workgroup and display its name :
(Get-WmiObject -Class Win32_ComputerSystem).PartOfDomain
In this exemplar, the calculator is joined to the WKGP workgroup. To change the calculator ’ s workgroup mention to WORKGROUP :
restart your calculator :
If after rebooting the calculator appeared in a network environment, but you can ’ metric ton access it, check the network profile type ( placement ) on your computer. Most likely your local network was recognized as Public. You need to change the network localization to Private. To do this, open the Settings – > Network and Internet – > Status – > select your network connection ( Ethernet 2 in my case ) and chink Properties. Check that the Network Profile is set to Private ( if it ’ mho set to Public, change the network type to Private ) .
resume your computer, open the Network and check if nearby Windows computers are displayed .
If these tips did not help, and the computers in the workgroup are still not displayed, try to reset the network settings ( Settings – > Network and Internet – > Status – > Network Reset ) .
Read more: Best Free Karaoke Software for Windows
You can besides reset the network settings and Windows Defender firewall rules with the commands :
netsh int ip reset reset.txt
netsh winsock reset
netsh advfirewall reset
then you need to reboot the calculator .
devmgmt.msc console -> expand Network Adapters -> select your NIC -> Uninstall device). Check if there are any In some cases, you need to wholly remove your network arranger using the Device Manager ( run theconsole – > expand Network Adapters – > select your NIC – > Uninstall device ). Check if there are any obscure network adapters in the list ( View – > Show hide device ).
then restart your computer. Windows should automatically detect your network adapter and install the appropriate drivers. In this case, all old protocol settings for the network adapter will be reset. besides, check whether the comply services are running ( they should be in the automatic pistol inauguration state of matter to correctly display your net environment ). Run the services.mcs console table and check the services country :
- FdPHost – Function Discovery Provider Host (responsible for discovering other computers on the network);
- FDResPub – Function Discovery Resource Publication (allows other computers to discover your device on the network);
- Dnscache – DNS Client;
- SSDPSrv – SSDP Discovery;
- Upnphost – PnP Device Host.
In some cases, third-party antiviruses, firewalls, or VPN clients can block NetBIOS mention solution requests, WDS, and broadcast DNS queries ( there was decidedly a problem with ESET NOD32 ). Try to temporarily disable your antivirus/firewall/VPN and check if the network discovery works by rights on your Windows device .
Invisibility on LAN” option. Check if there are similar options in your installed programs. For example, in the NordVPN node, you need to disable the “ ” choice. Check if there are alike options in your install programs.
How to Enable Network Discovery on Windows 10 and 11?
Starting with Windows 10 1803 ( Spring Creators Update ), Microsoft developers removed the ability to create a HomeGroup. In accession, other Windows 10 and Windows 11 computers are no long displayed in the network environment of File Explorer when viewing network devices .
From Microsoft ’ s point of watch, a HomeGroup is a bequest way to create a local anesthetic area network to share folders and printers. alternatively of using a WorkGroup, Microsoft suggests using its cloud services ( OneDrive or access through Microsoft Accounts ) .
In order to access the shared resources on another calculator over the local network from a Windows 10 device, you need to know its hostname (
\\pcname1 ) or IP address (
\\192.168.1.90 ), but neighboring computers in the network are not displayed. however, this can be fixed .
You can create desktop shortcuts to neighboring computers by specifying the UNC path to them ( by calculator identify or IP address ).
The matter is that a separate Function Discovery Provider Host service is creditworthy for discovering neighboring computers on a Windows 10 network. Another service, Function Discovery Resource Publication, is responsible for discovering your calculator .
FdPHost service uses the Simple Services Discovery Protocol (SSDP) and Web Services Discovery (WS-Discovery) protocols to discover devices on the network.
Theservice uses theandprotocols to discover devices on the network. These protocols replace the NetBIOS over TCP/IP, which has historically been used to discover devices on Microsoft Windows networks with Master Browser. accordingly, you can safely disable the NetBIOS protocol for your network adapters. After installing the latest Windows 10 builds, these services can be disabled ( the startup type changed from Automatic to Disabled ). If these services are stopped, the computer is not discovered on the network by other computers and can not see others. You can enable the network discovery services in Windows 10 as follows .
- Open the Windows Services Management console (
- Change the service startup type from Manual to Automatic (Delayed Start)
- In the list of services, find the Function Discovery Resource Publication service;
- In the same way, enable the Function Discovery Provider Host service;
get-Service fdPHost,FDResPub|Set-Service -startuptype automatic -passthru|Start-ServiceYou can set these services to start mechanically with the following one-line PowerShell :
- Restart your computer
After rebooting, other computers on the local network will be able to discover this computer and its resources ( shared network printers and folders ) .
Computer Browser Service and SMB 1.0 Protocol in Windows 10/11
It happens that problems with displaying computers in a network environment are related to the Computer Browser service. This military service is responsible for generating and maintaining a number of active computers on the local net. There can be only one active calculator with the Master Browser function on a local anesthetic network .
You can identify the stream Master Browser host in your net by running the trace command on each calculator in your network :
nbtstat -a ComputerName
The computer that is the Master Browser is the merely matchless that has the value __MSBROWSE__.
On Windows 10 1703, the Computer Browser service works incorrectly. It is recommended to completely disable this service on Windows 10 and use the computer with Windows 8.1/Windows Server 2012 R2 as the Master Browser on your network. You can set the Master Browser computer via the register .
To disable the Computer Browser go to the register key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters and change the value of the MaintainServerList argument to No. To force hardening which calculator is the net Master Browser, change the value of MaintainServerList to Yes .
In addition, in Windows 10 1709 and newer ( 1803 up to 21H2 ), the Computer Browser serve and the SMB v1.0 protocol are disabled by nonpayment. The Computer Browser service is responsible for building a tilt of computers on the network and displaying them ( this discovery protocol is widely used ahead switching to the SSDP and WS-Discovery protocols ) .
You can check the condition of the SMBv1 protocol on your computer using the command :
Dism /online /Get-Features /format:table | find "SMB1Protocol"
If you have only computers running Win 10 1709 and newer in your local network ( see the table of SMB versions ), and you distillery want to use the Computer Browser, you will have to enable the SMB v1.0 protocol on at least one calculator ( it’s not safe! ). This calculator will be used as the Master Browser on your network .
You can enable the SMB 1.0 support by enabling the follow Windows features from the Control Panel (
OptionalFeatures.exe ) :
- SMB 1.0 /CIFS Client;
- SMB 1.0 /CIFS Server.
Or you can enable SMB 1.0 features with the DISM commands :
Dism /online /Enable-Feature /FeatureName:"SMB1Protocol-Client"
Dism /online /Enable-Feature /FeatureName:"SMB1Protocol-Server"
We remind you that it is not recommended to enable the client or, furthermore, the SMB1 waiter in Windows. The SMB 1.0 protocol is not impregnable and a bunch of SMB1 vulnerabilities can be well exploited remotely .
If you enabled the SMB1 protocol, then in order to set the stream computer as the Master Browser on the network, run the follow commands :
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters" /v IsDomainMaster /t REG_SZ /d True /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters" /v MaintainServerList /t REG_SZ /d Yes /f
This calculator will be the Master Browser in your network .
Cannot See Shared Folders from a Windows Device
In some cases, Windows 10 can see and explore a neighbor device in a workgroup environment, but can not display a list of shared network folders on it. This is most frequently accompanied by the error “ 0x80070035 – Network path not found ”. The solution to this problem is described in this article .
If a neighbor calculator ( device ) is visible on the network, but when you try to open any divided network booklet from the Network Neighborhood or by the UNC path ( \\Hostname_or_IP ), an error appears “ You can ’ triiodothyronine access this shared folder because your organization ’ mho security policies block unauthenticated guest access ”. In this case, you need to enable the AllowInsecureGuestAuth register parameter using the instruction ( for details, see the article Can ’ thyroxine Access Shared Folder on Windows 10 ) :
reg add HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters /v AllowInsecureGuestAuth /t reg_dword /d 00000001 /
If all else fails and the computers are still not visible in the local anesthetic network environment :
- Turn off all computers and restart your router or Wi-Fi access point;
- If your LAN is based on a Wi-Fi router, check if the client isolation feature is disabled on it(wireless isolation, client isolation, or AP isolation).In TP-Link Wi-Fi routers, this option is located in the “Advanced Settings” section;
- If your computer has an active VPN connection, try disconnecting it and checking for network discovery on your local network;
- If your computer has several active network interfaces (for example, Wi-Fi and Ethernet), try to disable all interfaces except those connected to the local network with other devices;
- Try temporarily disabling your antivirus and/or firewall software;
- Disable the IPv6 protocol in the properties of your network connection;
- Check the availability of computers in your LAN using standard Windows tools:
Test-NetConnection hostname -port 445