Fix: Network Adapter Not Detected in Windows 10

Windows 10 is the latest and greatest translation of the Windows Operating System, but it is far, far from paragon. Among the many issues that Windows 10 users from all over the earth have faced is their net adapters and their drivers not working in Windows 10. Some of the Windows 10 users affected by this issue just don ’ t see their network adapters being listed in Device Manager, some of these users ’ computers fail to recognize their network adapters, and, in some cases, the network adapters don ’ deoxythymidine monophosphate work even though they are recognized and are listed in Device Manager. Keep in take care that to perform some steps in the solutions below, you will need Internet connectivity, so, you may use a USB arranger, ethernet cable, Wi-Fi connection, or Bluetooth connection ( for example, use mobile ’ sulfur internet through Bluetooth ) to perform those steps .

Power Off Your Device and Unplug its Power Cable

A impermanent bug in the power options of your device ( like the net adapter is put to “ deep sleep ” by the OS ) may cause the network arranger not detected in Windows 10. In this font, powering off your device and unplugging its world power cable may solve the trouble .

  1. Shut down your PC and unplug its power cable. In the case of a laptop, remove its battery.
  2. Now hold the power button for a minute and then leave the system unplugged for 30 minutes.
  3. Then connect back the power cable to your system (in case of a laptop, put back its battery) and power on the system to check if it is clear of the network adapter issue.

If the issue persists and you are using a laptop, you may battery drain the laptop and subsequently, check if the offspring is resolved.

Use the Network Adapter Troubleshooter

Microsoft has bundled Windows 10 with a bunch together of troubleshooters to solve the common system issues and one such troubleshooter is the Network Adapter Troubleshooter. Before diving into the more technical solutions, it will be a good theme to run the Network Troubleshooter to solve the issue .

  1. Right-click Windows and open Settings.1. Open Windows Settings 1
  2. Now select Update & Security and head to the Troubleshoot tab.2. Open Update Security 1
  3. Then open Additional Troubleshooters (in the right pane) and expand Network Adapter.5. Open Additional Troubleshooters
  4. Now click on Run the Troubleshooter and apply the suggestions by the troubleshooter.1. Run the Network Adapter Troubleshooter
  5. Then check if the network adapter is detected in Windows 10.

Update the System Drivers to the Latest Build

Your network driver might not be shown in the Device Manager if the system drivers are outdated. In this sheath, updating the system drivers ( specially, the chipset drivers ) may solve the problem. But before that, check if uninstalling the latest windows update ( if the issue started after a Windows update ) solves the network arranger trouble .

  1. Manually update the system drivers to the latest built. Do not forget to check the OEM website for the updated system drivers. If your OEM has an update utility (like Dell Support Assistant), use that utility to update the drivers.
  2. Once the system drivers are updated, check if the network adapter issue is resolved.

If the emergence persists, you may try an older driver or roll back to an older driver of the network arranger to solve the topic .

Edit Power Plan Settings

The network adapter might not be detected in Windows 10 if the office settings of your device are putting the adapter to “ sleep ”. In this context, editing the ability plan settings of your arrangement may solve the network adapter trouble .

  1. Right-click Windows and select Power Options.
  2. Now, in the right pane, click on Additional Power Settings and open Change Plan Settings.18. Open Additional Power Settings
  3. Then click on Change Advanced Power Settings and expand Wireless Adapter Settings.3. Change Advanced Power Settings
  4. Now expand Power Saving Mode & set On Battery and Plugged-in to Maximum Performance (if it is already set to Maximum performance, see the bottom of this solution).11. Set Power Saving Mode in Power Options to Maximum Performance
  5. Then apply your changes and unplug the power cable of your laptop.
  6. Now shut down your system (not restart) and then power on your system.
  7. Then check if the network adapter issue is resolved. If so, you may connect back the laptop’s power cable.

If at step 4 the On-Battery or Plugged-in options are already set to Maximum Performance, set the options to Power Saving mode and shut down your personal computer. then follow the above steps and check if it solves the net adapter consequence .

Disable the Fast Startup Feature of Windows 10

Fast Startup helps your personal computer to boot up promptly ( as the diagnose suggests ) but as it restores the system from a desegregate state between hibernation and shut down, it may “ overlook ” an essential resource and thus cause the emergence at hand. In this scenario, disabling the Fast Startup have of Windows 10 may solve the issue .

  1. Right-click Windows and open Power Options.
  2. Now open Additional Power Settings and in the resulting window, click on Choose What the Power Buttons Do.19. Open Choose What the Power Buttons Do
  3. Then click on Change Settings That Are Currently Unavailable and in the bottom section of the window, uncheck Turn on Fast Startup.20. Disable Fast Startup
  4. Now save your changes and shut down your PC (do not restart).
  5. Then power on your PC and check if it is clear of the network adapter issue.

Show Hidden Devices in the Device Manager and Reinstall the Network Adapter

The network arranger may not be shown in the active devices but is stage in the hidden devices. In this case, uninstalling the hidden network arranger and reinstalling it may solve the problem.

  1. Click Windows, type: Command Prompt, and right-click on it. Now choose Run as Administrator.25. Open Command Prompt as Administrator 2
  2. Now execute the following:
    SET DEVMGR_SHOW_NONPRESENT_DEVICES=1

    2. Set Device Manager to Show Non Present Devices Throught the Command Prompt

  3. Then right-click Windows and open Device Manager.
  4. Now, on the menu bar, click on View and select Show Hidden Devices.5. Show Hidden Devices in Device Manager
  5. Then expand Network Adapters and check if a hidden network card is shown (a bit greyed out entry).
  6. If so, right-click on the hidden network adapter and select Uninstall.4. Uninstall the Hidden Network Adapter in the Device Manager
  7. Then checkmark the option of Delete the Driver Software for This Device (if available) and click on Uninstall.
  8. Now repeat the same for all the hidden network drivers.
  9. Once the hidden network adapters are uninstalled, reboot your PC and upon reboot, check if the network adapter is detected in Windows.
  10. If not, check if installing the latest driver from the OEM website sorts out the adapter issue.

Use the Command Prompt to Reset Adapter

If the issue persists flush after trying the solutions above, then you may try the administrator command prompt to solve the network arranger emergence .

  1. Click Windows, type: Command Prompt, right-click on it and select Run as Administrator.
  2. Now execute the following cmdlets in the Command Prompt:
    netsh int ip reset reset.txt
    
    netsh winsock reset
    
    netsh advfirewall reset

    3. Reset IP Winsock and Advfirewall Through the Command Prompt

  3. Then reboot your PC after exiting the Command Prompt and check if it is clear of the network adapter issue.
  4. If that did not work, check if executing the following cmdlet in the Command Prompt solves the network adapter issue:
    netcfg -v -u dni_dne

Disable Conflicting Devices in the Device Manager

The network arranger might not be shown in the Device Manager if a conflicting device is hindering the operation of the network adapter. In this context, disabling the conflict devices in the Device Manager ( PCMCIA adapter is reported to cause the consequence ) may solve the problem .

  1. Right-click Windows and select Device Manager.
  2. Then expand the PCMCIA adapter and right-click on the adapter (e.g., O2Micro OZ6912/601/711E0 CardBus/SmartCardBus Controller).
  3. Now select Disable Device and confirm to disable the device.5. Disable PCMCIA Adapter in the Device Manager
  4. Then repeat the same for the VPN and VMWare adapters.
  5. Now restart your system and check if the network adapter issue is resolved.

If that did not do the magic trick, you may try to disable all the non-essential devices one by one to find the baffling one .

Uninstall the Conflicting Applications

Windows 10 might not show a net adapter in the Device Manager if an application ( specially a VPN customer like Junos VPN ) is hindering the network modules of the OS. In this scenario, uninstalling the conflicting applications ( like Cisco AnyConnect ) may solve the problem .

  1. Right-click Windows and select Apps & Features.
  2. Then expand any VPN-based application (like Cisco AnyConnect) and click on Uninstall.6. Uninstall Cisco Anyconnect
  3. Now confirm to uninstall the VPN application and reboot your PC.
  4. Upon reboot, check if the network adapter is working fine.
  5. If not, you may uninstall any VMware-related applications and reboot your PC to check if that resolves the network adapter issue.

If the return persists, then you may clean boot your personal computer to find out the debatable application ( like Visio 2016 ). source :

Edit the BIOS Settings of Your PC

Windows 10 might not show the network adapter in the Device Manager if the BIOS of your system is outdated or not by rights configured. In this scenario, updating the system ’ s BIOS or by rights configuring the system ’ s BIOS may solve the problem. Warning : advance at your own risk as editing the system ‘ s BIOS ( or updating it ) is a technical skill and if not done by rights, you may cause deathless price to your system/data.

Disable/Enable the Network Adapter in the BIOS Settings

  1. Boot your system into BIOS and expand Wireless.
  2. Now, in the left pane, select Wireless Device Enabled, and in the right pane, uncheck WLAN.
  3. Then uncheck Bluetooth and apply your changes (do not exit BIOS).7. Disable WLAN and Bluetooth in the BIOS Settings
  4. Now, in the left pane, expand the System Configuration tab and select Integrated NIC.
  5. Then, in the right pane, select Disabled and apply your changes.8. Disable Integrated NIC in BIOS
  6. Now boot your system into Windows and once fully booted into Windows, power off your system.
  7. Then boot into BIOS and enable Wireless, Bluetooth, and onboard LAN.
  8. Now boot your system into Windows and check if the network adapter is working fine (you may have to install the latest driver from the OEM website).

Update the BIOS to the Latest Built

  1. Update the system’s BIOS to the latest built (as per the OEM):
    • Dell
    • HP
    • Lenovo
    • Gateway
    • MSI
  2. Once BIOS is updated, check if the network adapter issue is resolved.

Reset BIOS to Defaults and Clear the CMOS Memory

  1. Boot your System into BIOS and near the bottom of the right pane, click on Restore Settings (or Load Defaults).8. Reset BIOS to Factory Settings
  2. Then confirm to restore the BIOS Settings and once done, boot into Windows after exiting BIOS.
  3. Now hopefully, the network adapter is detected in the Device Manager of Windows 10.

If not, then you may have to clear the CMOS memory ( for details instructions, check method 2 of how to fix Memory Management BSOD ) by pulling out the cell on the motherboard and wait for at least 5 minutes. then space back the cell and world power on the system to check if the network arranger issue is resolved ( you may have to set your hard drive as the first gear boot option in the BIOS ). If the issue persists, you can fix your network adapter in Windows 10 by performing an in-place upgrade ( download the Windows 10 ISO charge and launch it as administrator ) of your system to solve the net adapter consequence .

source : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.