Administration Guide | FortiGate / FortiOS 7.0.4 | Fortinet Documentation Library

Basic configuration

This topic will help you configure a few basic settings on the FortiGate as described in the Using the GUI and Using the CLI sections, including :

Configuring an interface

It is improbable the default interface shape will be appropriate for your environment and typically requires some effort of the administrator to use these settings, such as being physically near the FortiGate to establish a serial association. consequently, the first footprint is to configure an interface that can be used to complete the FortiGate shape .

To configure an interface in the GUI:
  1. Go to Network > Interfaces. Select an interface and chink Edit .
  2. Enter an Alias.

  3. In the Address section, enter the IP/Netmask .
  4. In Administrative Access section, select the access options as needed ( such as PING, HTTPS, and SSH ) .
  5. optionally, enable DHCP Server and configure as needed .
  6. Click OK .
To configure an interface in the CLI:
config system interface
    edit "port2"
        set ip
        set allowaccess ping https ssh
        set alias "Management"

Configuring the hostname

Setting the FortiGate ’ second hostname assists with identifying the device, and it is specially useful when managing multiple FortiGates. Choose a meaningful hostname as it is used in the CLI comfort, SNMP system identify, device name for FortiGate Cloud, and to identify a member of an HA cluster .

To configure the hostname in the GUI:
  1. Go to System > Settings .
  2. Enter a name in the Host name sphere .
  3. Click Apply .
To configure the hostname in the CLI:
config system global
    set hostname 200F_YVR

Configuring the default route

Setting the default path enables basic routing to allow the FortiGate to return traffic to sources that are not directly connected. The gateway address should be your existing router or L3 switch that the FortiGate is connected to. If you are directly connecting to the FortiGate, you may choose your end point ’ sulfur IP address as the gateway address. Set the interface to be the interface the gateway is connected to.

To configure the default route in the GUI:
  1. Go to Network > Static Routes and click Create New .
  2. Leave the finish subnet as This is known as a default route, since it would match any IPv4 address .
  3. Enter the Gateway Address .
  4. Select an Interface .
  5. Click OK .
To configure the default route in the CLI:
config router static
    edit 0
        set gateway
        set device port1

Ensuring internet and FortiGuard connectivity

This measure is not necessary for the shape ; however, it is necessary in order to keep your FortiGate improving to date against the latest threats. Updates are provided to FortiGates that are registered and make a request to the FortiGuard net to verify if there are any more recent definitions .
Use execute ping to ensure the DNS resoluteness is able to resolve the following FortiGuard servers :

You besides need to ensure the necessary ports are permitted outbound in the event your FortiGate is behind a filter device. Refer to the Ports and Protocols text file for more information .

reference :
Category : Tech

About admin

I am the owner of the website, my purpose is to bring all the most useful information to users.

Check Also


Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.