Fix WiFi not Working Issue on Windows 10. Easily! – Driver Easy

img 589bcd7879691

Many users have reported that they are having trouble using their Wi-Fi after upgrading to Windows 10. There could be many different causes to this problem: interference, signal range limits, hardware problems and operator errors could be the culprit to your Wi-Fi problems. 

So it is suggested that you follow the instructions below to get Windows 10 wifi not working issue fixed by yourself. There are four methods for you to fix the issue. You may not have to try them all; just work your way down the list until you find the one that works for you.

Option Two: Update Wi-Fi Drivers 
Option Three: Reset Network Connection Settings 
Other options

Before we begin

Before we go any further, please make indisputable that you have tried things listed below. This will help us narrow down the lawsuit of your Wi-Fi trouble .

1) Make sure your Wi-Fi is on. Follow the path Start button > Settings > Network & Internet > Wi-Fi to check. 

img 589bd4625afa9
2 ) Make sure your forcible Wi-Fi switch on your laptop is turned on. The position of this enchantress differs, and you might need to refer to your personal computer manuscript for more information. You should be able to see a Wi-Fi picture on the switch over. If you can see an indicator light, your Wi-Fi is on .

3) Make sure the airplane mode is off. Follow the path: Start button > Network & Internet > Airplane mode. Turn airplane mode off if it’s on. 

4) If you have not restarted your router yet, please restart it. 

5) Make sure that it is not a problem with your cable modem or Internet service provider (ISP). 

a. Press Windows key and X at the same time, then choose Command Prompt

img 589bd889eb8b1

b. Type in ipconfig and hit Enter. Then locate category Default gateway. Write down the address for later use. The address could be like this: 192.168.1.1.

img 589bd9237fba9

c. Now type in the following command: 

ping 

and press Enter

img 589bd9a5409b6

If you are seeing similar result and still cannot connect to the Internet, the problem could be your modem or ISP. Please contact your ISP for more support. 

Option One: Manually Re-install Wi-Fi Driver

1 ) Press Windows key and X at the like time, then choose Device Manager.

img 589bdb7828b23

2) Locate category Network adapters. And then right click the Wi-Fi driver you have on your PC and choose Update Driver Software. The Wi-Fi driver we have is Qualcomm Atheros Wireless Adapter. Yours could be different. 

img 589bddc65fb02
3 ) Choose Browse my computer for driver software .
img 589bde8f4c837
4) Then choose Let me pick from a list of device drivers on my computer

img 589bdeca48093

5) Tick the box for Show compatible hardware. Then choose the option with the same name as the your Wi-Fi driver. Then click Next to continue.

img 589bdf41baddb

6) Now just wait for the following notification to appear: 

img 589be1593c7c5

7) Check to see if you can use your Wi-Fi now. 

Option Two:  Update Wi-Fi Drivers 

1 ) Press Windows key and X at the same time, then choose Device Manager .

2) Locate category Network adapters. And then right click the Wi-Fi driver you have on your PC and choose Update Driver Software.

3 ) Choose Search automatically for updated driver software .
img 589be1f4e16ff
4 ) then wait for Windows to locate the decline driver for you .
img 589be254a3a3e
If this is what you are seeing, then you need to find an alternate option to update your Wi-Fi driver.

It is suggested that you have a try at Scan Now button for Driver Easy to detect the needed driver for you.

img 58f0758465dd8
2 ) Click the Update button next to the driver you want to update .
img 58f0759bd2f49
That ’ s it ! Your drivers are updated to the latest adaptation now .

If you are interested, feel free to give

Option Three: Reset Network Connection Settings 

If the above methods do not help, please try rest the settings of your network connections in Command Prompt .

1) Press Windows key and R at the same time, then choose Command Prompt (Admin)

img 589be9cd8fb79
When asked for administrator license, click Yes to continue .

2) In the Command Prompt window, type in the following command in order. 

  • Type netsh winsock reset and press Enter.
  • Type netsh int ip reset and press Enter.
  • Type ipconfig /release and press Enter.

many users have reported that they are having perturb using their Wi-Fi after upgrading to Windows 10. There could be many different causes to this trouble : hindrance, bespeak roll limits, hardware problems and hustler errors could be the perpetrator to your Wi-Fi problems. SoThere aremethods for you to fix the issue. You may not have to try them all ; just work your way down the number until you find the one that works for you. Option One: Manually Re-install Wi-Fi Driver 1 ) Make indisputable your Wi-Fi is on. Follow the pathbuttonto check.3 ) Make sure the airplane mode is off. Follow the way : clitoris. Turn airplane modeif it ’ mho on. 4 ) If you have not restarted your router so far, please restart it. 5 ) Make certain that it is not a trouble with your cable modem or Internet service supplier ( ISP ). a. Pressandat the lapp time, then chooseb. Type inand hit. then locate class. Write down the address for later use. The address could be like this : 192.168.1.1.c. now type in the surveil command : and pressIf you are seeing alike solution and distillery can not connect to the Internet, the trouble could be your modem or ISP. Please contact your ISP for more support.2 ) Locate category. And then right click the Wi-Fi driver you have on your personal computer and choose. The Wi-Fi driver we have is. Yours could be different.4 ) then choose5 ) Tick the box for. then choose the option with the same name as the your Wi-Fi driver. then clickto continue.6 ) now just wait for the following notification to appear:7 ) Check to see if you can use your Wi-Fi now.2 ) Locate category. And then right click the Wi-Fi driver you have on your personal computer and chooseIt is suggested that you have a test at Driver Easy, a program that automatically helps you detect, download and install the device drivers you need. You have full control in the whole process. All it takes is just two clicks to get your device drivers updated : 1 ) Click thebutton for Driver Easy to detect the needed driver for you.If you are interest, feel dislodge to give Driver Easy a shoot ! If you are looking for more features and the amaze download and update accelerate, by all means, have a attempt at the professional version of Driver Easy. What ’ s more, we provide professional technical school support to help you with any driver problems that you are having now. If you find the pro translation not meeting your needs, precisely ask for a refund 30 days within the purchase. guarantee ! 1 ) Pressandat the same time, then choose2 ) In the Command Prompt window, type in the take after command in order. img 589bebbb068dd

  • Type ipconfig /renew and press Enter.
  • Type ipconfig /flushdns and press Enter.

img 589bebffbda43

Other options

You can besides give the follow options a try to see if they are able to help you with this problem .

1) Temporarily turn off firewalls. 

2) Temporarily shut turn off your antivirus or malware-protection software. 

3) Roll back your Wi-Fi driver. If this problem happened after you updated your Wi-Fi driver,  you may need to consider getting the old driver back by rolling it back in Device Manager to make your Wi-Fi work again. 
1 ) temporarily turn off firewalls. 2 ) temporarily shut turn off your antivirus or malware-protection software. 3 ) Roll back your Wi-Fi driver. If this trouble happened after you updated your Wi-Fi driver, you may need to consider getting the previous driver back by rolling it back in Device Manager to make your Wi-Fi work again .

informant : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.