tp-link Powerline Adapter Installation Guide – Manuals+

tp-link Powerline Adapter Quick Installation Guide

hypertext transfer protocol : //www.tp-link.com

For technical foul documentation, the User Guide and other information, please visit hypertext transfer protocol : //www.tp-link.com/support. © 2021 TP-Link 7106509130 REV2.2.1 *Images may differ from actual products.

spark plug and Play

  1. Connect one adapter to a LAN port of your router using an Ethernet cable.
  2. Plug the other adapter into the wall outlets on the same electrical circuit.
  3. Wait until the Powerline LED on any adapter turns on.
  4. Connect your computer to the adapter using an Ethernet cable.
  5. Enjoy!

More: To add extra Powerline adapters and extenders with the nonpayment settings, simply plug them into the wall outlets on the like electrical circuit .

attention

  • Plug the powerline devices directly into the wall outlets but not the power strips.
  • For passthrough powerline devices, plug the power strips into the integrated electrical sockets of the powerline devices.

Secure the Powerline Network with the Pair Button

Tip: We recommend that you plug in the powerline devices near each other when pairing.

Set up a secure network: If you have more than 2 powerline devices, repeat the steps below on each extra devices to be configured :

FAQ ( frequently Asked Questions )

Q1. How do I reset my powerline adapter?
A1. With the powerline arranger plugged into to the electrical exit, press and hold the Pair release until the Power LED goes off momentarily and comes back on.
A2. Use the tpPLC Utility to reset the powerline arranger.

Q2. How to troubleshoot if there is no internet connection in my powerline network?
A1. Make sure all powerline devices are on the same electric circuit.
A2. Make certain all Powerline LEDs are on. If not, pair your adapters and extenders again.
A3. Make surely all hardware connections are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
A5. Make sure your calculator ’ second IP address is in the lapp segment as your router ’ mho. Q3. What can I do if a successfully-paired powerline device does not reconnect after it has been moved to a new location?
A1. Try another socket and make sure it is on the lapp electric lap.
A2. Try to pair it again, and make sure the Powerline LED is on.
A3. Check for potential hindrance, such as a washer, air conditioner or other family appliances that may be excessively close to one of the powerline devices. Plug the appliance into the integrate electric socket ( if the powerline device has one ) to remove some electric noise. More advanced configurations, such as firmware ascent and QoS shape, can be accessed through the tpPLC Utility. You can install the tpPLC Utility from the TP-Link official web site. TP-Link hereby declares that this device is in complaisance with the all-important requirements and other relevant provisions of directives ( EU ) 2015/863, 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU. The original EU contract of ossification may be found at http://www.tp-link.com/en/ce .

safety information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
  • For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
  • Plug the powerline devices directly into the wall outlets but not the power strips.

Ezoic report this ad Please read and follow the above guard information when operating the device. We can not guarantee that no accidents or damage will occur due to improper habit of the device. Please use this intersection with concern and engage at your own gamble .

Documents / Resources

References

reference : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.