6/14

3 Installing, Updating, and Configuring WebSphere 8.5 and 8.5.5

note :
Unless otherwise noted, all references to WebSphere version 8.5 are also applicable to WebSphere version 8.5.5. Unless otherwise noted, all references to WebSphere translation 8.5 are besides applicable to WebSphere version 8.5.5. Beginning with JD Edwards EnterpriseOne Tools Release 9.1 Update 2.3, the IBM WebSphere Application Server Release 8.5 is supported.

Beginning with JD Edwards EnterpriseOne Tools Release 9.1 Update 3.3, the IBM WebSphere Application Server Release 8.5.5 is supported. This fix pack can be installed as a raw facility or an update .
relative to WebSphere 7.0, with IBM WebSphere 8.5 the facility routine has changed dramatically. You will now use the IBM Installation Manager as a cardinal hub to manage the installation process. The IBM Installation Manager is designed to make the facility procedure much dim-witted and easier than in anterior releases .
additionally IBM WebSphere Application Server 8.5 supports SDK 1.6 as the basic configuration but with SDK 1.7 as an optional configuration. For JD Edwards EnterpriseOne, the execution requires SDK 1.7 as the default option run-time configuration for WebSphere Application Server 8.5. therefore, after WebSphere Application Server is installed with the basic configuration, you MUST change the default SDK to 1.7 .
This chapter describes these tasks :

3.1 Before You Begin

Before you install WebSphere, you must beginning set up a local anesthetic user account that is in the Administrative group and has these advanced drug user rights :

• Act as function of engage system
• Create a nominal object
• Log on as a avail
• Replace a action level keepsake

To set up a local user account with the above exploiter rights, voyage to :
Control Panel > Administrative Tools > Local Security Policy > Local Policies > Users Rights Assignment
On User Rights Assignment, double-click one of the user rights, click Add, select a local exploiter account from the list, and snap OK. Repeat this process for the remaining user rights .
You should besides download all the command software from the JD Edwards Update Center .

3.2 Installing the IBM Installation Manager

For all digest platforms, you must install the IBM Installation Manager before an IBM WebSphere Application Server can be installed. Follow the steps below to install the Installation Manager .

1. After you have downloaded and unzipped the IBM Installation Manager software, locate the install feasible .
   On Microsoft Windows 2008R2, you must right-click and select the Run as administrator option .
   
2. On Install Packages, box selection, select the check box for the latest adaptation of the IBM Installation Manager .
3. Click the Next button .
   
4. On Install Packages, review the International Program License Agreement and click the radio button to accept the terms if you want to continue with the installation .
5. Click the Next button .
   
6. On Install Packages, select a localization for Installation Manager, enter an initiation directory .
   For case :
   Z:\IBM\Installation Manager\eclipse
   
7. On Install Packages, compendious information, review the drumhead information and click the Install button to begin the installation .
   
8. On Install Packages, if you are ready to install using the IBM Installation Manager, click the Restart Installation Manager button .
9. After the Installation Manager is restarted, continue to the future section in this chapter entitled : section 3.3, “ Installing an IBM WebSphere Application Server 8.5 or 8.5.5 ” .

3.3 Installing an IBM WebSphere Application Server 8.5 or 8.5.5

IBM WebSphere Application Server ( WAS ) 8.5 is installed through the IBM Installation Manager. Fix Pack 8.5.5 can be installed as a newfangled initiation or an update. For purposes of this procedure, all references are to release 8.5, but you can substitute 8.5.5 where applicable .
To install an IBM WebSphere Application Server 8.5 :

1. Start the IBM Installation Manager, which you must have previously installed as report in the preceding chapter of this guidebook entitled : department 3.2, “ Installing the IBM Installation Manager ” .
   The IBM Installation Manager screen displays .
   
2. You must configure the software depository in the Installation Manager before you can start the product initiation. On the initial screen of the IBM Installation Manager, navigate File > Preferences .
   
   
3. On Preferences, snap on the Add Repository … button and enter the placement of the repository.config for each of the intersection. For case :
   Z:\Software\WAS85\ND\repository.config
Z:\Software\WAS85\Suppl\repository.config
Z:\Software\WAS85\JDK17\repository.config
   
4. optionally, if needed for your facility, you should enable a proxy server and record proxy information .
5. After all repositories are added, click the Install choice from the Installation Manager .
   IBM Installation Manager displays a list of available products, as shown in the postdate case :
   
6. The IBM Install Manager displays a list of available products ( packages ) to install .
   
7. On Install Packages, choice packages, select the products you want to install such as :
   • WebSphere Network Deployment
   • SDK 1.7
8. Click the Next clitoris .
   bill :
   Once the installation begins, the installer may prompt to inform you that updates are available. once the initiation begins, the installer may prompt to inform you that updates are available. If Updates are available, the installer will display a list as shown in this case :
   
9. If the IBM Install Manager displays a tilt of updates, it is recommended that you click the Select Recommended button to accept and install the updates .
10. On Install Packages, review the International Program License Agreement and click the radio button to accept the terms if you want to continue with the installation .
    
11. On Install Packages, blue-ribbon location for the share resources directory, enter an appropriate location for IMShared. These files will be used by all IBM products installed through the Installation Manager ( such as HTTP Server and Customization Toolbox ) .
    For model :
    z:\IBM\IMShared
12. Click the Next button .
    
13. On Install Packages, software group, click the radio receiver button entitled : Create a new package group .
    In the Installation Directory airfield, enter an allow location to install the IBM WebSphere Application Server 8.5 software. It does not have to be the same location as the shared localization .
    For example :
    z:\IBM\WebSphere\AppServer
14. Click the Next button .
    
15. On Install Packages, translations, select your hope language .
16. Click the Next button .
    
17. On Install Packages, choose features, verify that the software for Java JDK 1.7 is selected .
    circumspection :
    Although JDK 1.6 is the default installation, you must choose to install JDK 1.7 in order to be compatible with JD Edwards EnterpriseOne. Although JDK 1.6 is the default facility, you must choose to install JDK 1.7 in order to be compatible with JD Edwards EnterpriseOne .
18. Click the Next button .
19. Click the Install button .
    
20. On Install Packages, the packages are installed, click the Finish button .
21. To create a visibility, ensure this radio button in the veracious paneling is selected :
    Profile Management Tool to create a visibility .
    Continue to the following section of this chapter entitled : section 3.4, “ Creating a New Profile for WebSphere Application Server 8.5 ” .

3.4 Creating a New Profile for WebSphere Application Server 8.5

The section describes how to create a new profile. This profile will be used later in the installation procedure to create a web waiter and configure the plugin .
note : This document describes how to create a “ standalone ” application server. For information on how to create a cellular telephone and managed node, refer to IBM ‘s Infocenter :
http://www-01.ibm.com/software/webservers/appserv/was/library/
You can choose to create your first profile nowadays or after the remaining software packages have been installed. If you create your visibility immediately, you will need to manually define the web server before configuring the circuit board late in this chapter. As an alternate, you can use the advance profile creation option to mechanically create a web server, but this must be done after all of the other software components described in this guide are installed and updated to the right degree .
This procedure assumes you are creating a modern visibility at this time so that you can verify your initiation .

1. If you followed the last step in the preceding chapter entitled : section 3.3, “ Installing an IBM WebSphere Application Server 8.5 or 8.5.5 ”, the Profile Management Tool was launched .
   alternately, you can use this seafaring :
   IBM WebSphere > IBM WebSphere Application Server > Tools > Profile Management Tool
   
2. On WebSphere Customization Toobox, Profile Management Tool, with the Profiles check selected, click the Create clitoris .
   
3. On Profile Management Tools, Environment Selection, highlight the Application server environment type .
4. Click the Next push button .
   
5. On Profile Creation Options, select the Typical profile initiation radio button .
   note :
   Choosing distinctive profile initiation uses the default configuration settings. It assigns unique names to the profile, node, and host. The tool also assigns unique port values.
   Choosinguses the default shape settings. It assigns singular names to the profile, node, and host. The tool besides assigns singular port values. alternatively, you can choose Advanced profile creation to specify your own values for settings such as the location of the visibility and names of the profile, node, and horde .
6. Click the Next push button .
   
7. On Administrative Security, clear the Enable administrative security checkbox .
8. Click the Next button .
   
9. On Profile Creation Summary, review the information for accuracy and click the Create button .
   
   The build up screen is displayed. Wait for the progress to complete 100 %, which may take several minutes .
   
10. optionally, on Profile Creation Complete, you can select the arrest corner for Launch the First steps comfort .
11. Click the Finish push button .
    
12. If you chose to run First Steps, on WebSphere Application Server, First steps, select the inaugural option, which is entitled : facility confirmation .
    
13. Verify that the facility verification completed successfully. You should get the message entitled : The initiation confirmation is complete .
14. airless the screen for the First steps end product .
15. Verify that you can sign on to the Administration Console. For exemplar :
    http://host:9060/ibm/console

3.5 Installing the IBM HTTP Server 8.5

The IBM HTTP Server 8.5 must be installed through the IBM Installation Manager .
In order to install the IBM HTTP waiter, you must have the Supplemental images in the repository, as shown in the second line item in the following screen sample .

To install an IBM HTTP Server 8.5 :

1. Start the IBM Installation Manager, which you must have previously installed as report in the preceding chapter of this guide entitled : section 3.2, “ Installing the IBM Installation Manager ” .
2. Click the Install option .
   
3. On Install Packages, choose packages, click the checkboxes for the HTTP Server for WebSphere Application Server and the HTTP Server Version ( 8.5.x ) .
4. Click the Next button .
5. Review the International Program License Agreement and click the radio push button to accept the terms if you want to continue with the facility .
6. Click the Next clitoris .
   
7. On Install Packages, box group, click the radio receiver button entitled : Create a new package group. In the Installation Directory battlefield, enter an appropriate localization to install the IBM HTTP Server 8.5 software. It does not have to be the same localization as the shared location .
   For exercise :
   z:\IBM\HTTPServer
   This document refers to a local IBM HTTP server installed on the same machine as the IBM WebSphere Application Server. For instructions on how to install a distant HTTP server, refer to the IBM information center :
   http://www-01.ibm.com/software/webservers/appserv/was/library/
   besides note that the shared placement that you defined when you installed the IBM WebSphere Application Server in the former section can not be changed .
8. Click the Next button .
   
9. On Install Packages, select the features to install, verify the package you chose is selected .
10. Click the Next button .
    
11. On Install Packages, shape, dispatch these fields :
    • HTTP Port
      Specify a port for IBM HTTP Server to communicate. The default port is 80. If the default port is already in use, then change to another interface that is available. Running IBM HTTP Server without root or administrative privilege might restrict use of ports below 1024 .
    • Run IBM HTTP Server as a Windows Service
      guarantee this check box is checked .
    • Log on as a local organization account
      normally this check box should be selected. however your network configuration may require you to specify a user with specific authority across domains or network segments. Contact your System Administrator for more information .
    • Startup type
      Use the pulldown to choose a inauguration type for the Windows serve. The default option prize is Automatic .
12. Click the Next push button .
    
13. On Install Packages, review summary information, verify the accuracy of the selections .
14. Click the Install button to begin the initiation of the IBM HTTP Server .
    
15. On Install Packages, verify the installation completed successfully. You may want to click the connection : View Log File .
16. Click the Finish push button .
    You are returned to the IBM Installation Manager family screen .
17. To install the plug-ins, continue to the adjacent section entitled : section 3.6, “ Installing Web Server Plug-ins for IBM WebSphere Application Server ” .

3.6 Installing Web Server Plug-ins for IBM WebSphere Application Server

As with the former software packages described in this guide, the plug-ins for IBM WebSphere Application Server 8.5 must be installed using the IBM Installation Manager .
In orderliness to install the IBM HTTP waiter, you must have the Supplemental images in the repository, as shown in the second pipeline item in the follow screen sample .

To install Web Server Plug-ins for IBM WebSphere Applications Server :

1. Start the IBM Installation Manager, which you must have previously installed as identify in the preceding chapter of this template entitled : incision 3.2, “ Installing the IBM Installation Manager ” .
   
2. On IBM Installation Manager, click the Install option .
   
3. On Install Packages, blue-ribbon packages, click the checkboxes for the Web Server Plug-ins for WebSphere Application Server and the HTTP Server Version ( 8.5.x ) .
4. Click the Next button .
5. On Install Packages, review the International Program License Agreement and click the radio push button to accept the terms if you want to continue with the facility .
6. Click the Next button .
   
7. On Install Packages, package group, click the radio receiver clitoris entitled : Create a new package group .
   In the Installation Directory field, enter an appropriate placement to install the Web Server Plugins for IBM WebSphere Application Server 8.5 .
   For model :
   z:\IBM\WebSphere\Plugins
   eminence :
   New functionality for IBM WebSphere 8.5 for the plug-in installs provides this default location:
   New functionality for IBM WebSphere 8.5 for the circuit board installs provides this default location : \IBM\WebSphere\Plugins
   The remainder of this usher assumes you chose to accept the default location .
8. On Install Packages, revue compendious data, verify the accuracy of the selections .
9. Click the Install release to begin the installation of the JDK .
   The build up riddle is displayed. Wait for the advance to complete 100 %, which may take several minutes .
   
10. On Install Packages, verify the installation completed successfully. You may want to click the link : View Log File .
11. Click the Finish button .
    You are returned to the IBM Installation Manager dwelling blind .
12. To install the plug-ins, continue to the next section entitled : section 3.9, “ Installing the WebSphere Customization Toolbox ” .

3.7 Enabling SDK 7.0 on WebSphere Application Server 8.5

Starting with WebSphere Application Server 8.5, SDK 7.0 is supported as an optional feature of speech. The java 1.6 is silent the default installation .
caution :
JD Edwards EnterpriseOne supports WebSphere Application Server 8.5 running with SDK 7.0 only. You must switch the java level after the installation is completed. JD Edwards EnterpriseOne supports WebSphere Application Server 8.5 running with SDK 7.0 merely. You must switch the java tied after the facility is completed. You can switch the java level by using the managesdk dominate. The feasible for the managesdk command is located in the bin directory of your profile. For exercise :
Z:\IBM\WebSphere\AppServer\profiles\AppSrv01\bin
This section discusses how to use the managesdk command for these purposes :

• View Available Java Products
• View Available Java Products with Detail information
• Syntax Examples using the managesdk Command

View Available Java Products
Use this command to view the available Java products :
managesdk.bat -listAvailable
The follow shows a sample of come back information .

View Available Java Products with Detail Information

Use this command to view the available Java products with detail information :
managesdk.bat -listAvailable -verbose
The pursuit shows sample returned data .

Syntax Examples using the managesdk Command
The trace examples demonstrate correct syntax when you run the managesdk command :

managesdk.bat -listAvailable [-verbose]
 
managesdk.bat -listEnabledProfile -profileName AppSrv01 [-verbose]
 
managesdk.bat -listEnabledProfileAll [-verbose]
 
managesdk.bat -enableProfile -profileName AppSrv01 -sdkname 1.7_64 -enableServers
 
managesdk.bat -enableProfileAll -sdkname 1.7_64 -enableServers
 
managesdk.bat -getNewProfileDefault [-verbose]
 
managesdk.bat -setNewProfileDefault -sdkname 1.7_64
 
managesdk.bat -getCommandDefault [-verbose]
 
managesdk.bat -setCommandDefault -sdkname 1.7_64

3.9 Installing the WebSphere Customization Toolbox

New tool functionality with IBM WebSphere 8.5 includes the necessity to install the WebSphere Customization Toolbox. This instrument aids in configuring your circuit board by rights. The WebSphere Customization Toolbox comes from the auxiliary software depository that was downloaded, decompressed, and added to the depository list as described in previous procedures in this document .

1. Start the IBM Installation Manager .
   
2. On IBM Installation Manager, click the Install option .
   
3. On Install Packages, choose packages, select the two check boxes for WebSphere Customization Toolbox and his software and version Version 8.5.x .
4. Click the Next button .
5. On Install Packages, review the International Program License Agreement and click the radio button to accept the terms if you want to continue with the installation .
6. Click the Next button .
   
7. On Install Packages, box group, click the radio receiver button entitled : Create a fresh software group .
   In the Installation Directory field, enter an appropriate localization to install the WebSphere Customization Toolbox 8.5 .
   For example :
   z:\IBM\WebSphere\Toolbox
8. Click the Next push button .
   
9. On Install Packages, blue-ribbon features, choice Web Server Plug-ins Configuration Tool .
10. Click the Next clitoris .
    
11. On Install Packages, review compendious information, verify the accuracy of the selections .
12. Click the Install button to begin the initiation of the WebSphere Customization Toolbox .
    
    The progress screen is displayed. Wait for the progress to complete 100 %, which may take several minutes .
    
13. On Install Packages, verify the facility completed successfully. You may want to click the link : View Log File .
14. Click the Finish button .
    You are returned to the IBM Installation Manager home screen .

3.10 Installing or Updating to WebSphere 8.5 Fix Pack

Use these procedures to install or update your existing WebSphere components to WebSphere 8.5.0 Fix gang :

• section 3.10.1, “ Updating the IBM Installation Manager to WebSphere 8.5 or Greater ”
• section 3.10.2, “ Updating WebSphere Application Server 8.5 or Greater ”
• section 3.10.3, “ Working with the HTTP Server Component ”
• section 3.10.4, “ Working with the Plug-ins Component ”
• section 3.10.5, “ Working with the Customization Toolbox Component ”

3.10.1 Updating the IBM Installation Manager to WebSphere 8.5 or Greater

Use this procedure to update the IBM Installation Manager .
notice :
For instructions on installing the Update Installer itself, refer to the section of this guide entitled: For instructions on installing the Update Installer itself, refer to the section of this guide entitled : section 4.5, “ Installing the WebSphere Update Installer ”

1. Start the IBM Installation Manager using the IBMIM executable..
2. Open the Preferences of the IBM Installation Manager .
   
3. Highlight the Updates node and select this checkbox :
   search for Installation Manager Updates
4. Log out of IBM Installation Manager .
5. Log in to the Installation Manager and you will be prompted if a raw translation of Installation Manager is available .
   
6. On IBM Installation Manager, click the Yes button and follow the initiation charming to complete the upgrade .

3.10.2 Updating WebSphere Application Server 8.5 or Greater

Use this procedure to update WebSphere 8.5 or greater .

1. Stop all the WebSphere Processes including the HTTP Server and Web Server .
2. Launch the IBM Installation Manager using the IBMIM feasible .
3. Select the Update option .
   
4. On Package Group Name, select the IBM WebSphere Application Server intersection to which you wish to upgrade. For example :
   IBM WebSphere Application Server V8.5
   
5. On Password Required, enter valid credentials for your IBM ID to connect to the IBM download site by completing these fields :
   • User name
   • password

   
   bill :
   You can uncheck the show Recommended only option to list all available fix packs. You can uncheck theoption to list all available cook packs .

6. Review the license agreement and accept the terms in order to continue .
   
7. You can accept the recommend fix packs that are automatically checked .
   note :
   The recommended fix packs may vary depends on the platform. The recommend specify packs may vary depends on the platform .
8. On Features, use the checkboxes to select the components you want to install .
   
9. On Features to Install, review the summary of components that you have selected and click the Update button .
   
   The update work downloads the fix backpack from the IBM web site. The download focal ratio depends on the network connections .
   
10. Click the Finish button when the update is completed as indicated by this message :
    The packages are updated .

3.10.3 Working with the HTTP Server Component

Use this procedure to install or update the IBM HTTP Server Component for WebSphere 8.5 or greater .

1. Launch the IBM Installation Manager using the IBMIM feasible .
2. Select the Update option .
   
3. On Update, select this part for the version you want to install or update :
   IBM HTTP Server
   
4. On Features to Install, review the compendious of selected features and suction stop Update .
   
5. Click the Finish button when the update is completed as indicated by this message :
   The packages are updated .

3.10.4 Working with the Plug-ins Component

Use this routine to install or update the Plug-ins Component for WebSphere 8.5 or greater .

1. Launch the IBM Installation Manager using the IBMIM feasible .
2. Select the Update option .
   
3. On Update, select this part for the version you want to install or update :
   Web Server Plug-ins for IBM WebSphere Application Server
   
4. On Features, review the drumhead of selected features and snap Update .
   
5. Click the Finish clitoris when the update is completed as indicated by this message :
   The packages are updated .

3.10.5 Working with the Customization Toolbox Component

Use this procedure to install or update the Customization Toolbox Component to WebSphere 8.5 or greater .

1. Launch the IBM Installation Manager using the IBMIM feasible .
2. Select the Update choice .
   
3. On Update, select this component for the adaptation you want to install or update :
   WebSphere Customization Toolbox
   
4. On Features, verify the component you want to installed is selected..
   
5. On Update, review the compendious of selected features and suction stop Update .
   
6. Click the Finish clitoris when the update is completed as indicated by this message :
   The packages are updated .
7. Restart all HTTP Services .
8. Restart all Web Server instances .

3.11 Configuring the IBM Web Server Plug-in

After you have updated all software packages as described in the preceding section of this document entitled : section 3.10, “ Installing or Updating to WebSphere 8.5 Fix Pack ”, you must configure the circuit board. This action is performed through the IBM WebSphere Customization Toolbox. You must complete this configuration before you install the JD Edwards EnterpriseOne HTML Web Server .

1. Start the WebSphere Customization Toolbox using this seafaring :
   Start > Programs > IBM WebSphere > WebSphere Customization Toolbox V8.5 > WebSphere Customization Toolbox
   
2. On WebSphere Customization Toolbox, Welcome, in the number of leave tools, highlight the Web Server Plug-ins Configuration Tool .
3. Click the Launch Selected Tool clitoris .
   
4. In the Web Server Plug-in Runtime Location department, click the Add button .
   
5. On Add Web Server Plug-in Location, complete these fields :
   • diagnose
     Enter a name for the circuit board location. For case :
     IHS_webserver1
   • placement
     Enter the localization of your circuit board. The default circuit board directory is :
     Z:\IBM\WebSphere\Plugins
6. Click the Finish button .
   
7. In the upper half of the mannequin ( shown above ), verify the circuit board location that you fair defined is displayed in the Web Server Plug-in Runtime Locations section in the upper half of the phase .
   
8. In the lower half of the blind ( shown above ), click the Create button .
   
9. On Web Server Selection, choose this radio button :
   IBM HTTP Server V8.5 .
   
10. On Web Server Configuration File Selection, complete these fields :
    • Select the existing IBM HTTP Server httpd.conf file
      insert in the location of your httpd.conf file. For exercise :
      z:\IBM\HTTPServer\conf\httpd.conf
    • Specify the Web server port
      Specify a world wide web server port that matches the port used by your HTTP waiter .
11. Click the Next release .
    
    You will receive the Non-Administrative drug user shape limitation screen if you are not logged on as an administrative drug user .
12. Click the Next button .
    
13. If you are signed on as an Administrative User, you will see the above screen. You can choose to create a exploiter ID for IBM HTTP Server .
14. Click the Next release .
    
15. You can choose whether to use a Windows service to run IBM HTTP Server administration waiter. It is recommended that you select to run the Server as a Windows Service. optionally you can change the startup type to Manual if you are not going to use the HTTP Administration server much .
    
16. On Web Server Definition name, specify a vane server name. If you already have a web waiter defined ( for case, webserver1 ), then you should use the same appoint here .
    
    For the purposes of this guide, it is assumed that the HTTP Server and WebSphere Application Server are located on the lapp machine. therefore, on Configuration Scenario Selection, the radio button for ( Local ) Installation placement of WebSphere Application Server is selected .
17. Use the Browse button to locate the facility location of the WebSphere Application Server. For model :
    Z:\IBM\WebSphere\AppServer
18. Click the Next release .
    
19. On WebSphere Application Server Profile Selection, use the drop-down menu in available Profiles to select the WebSphere Application Server profile to configure with the current Web server circuit board and create the Web server definition. For example, an available visibility might be named AppSvr01 .
    bill : If the available Profiles field is lacuna and no options show on the spend down, you must Cancel from this procedure. Create a profile and either use the promote option to mechanically create a web server definition or manually create the web server in the IBM WebSphere Application Server Administrative Console. For more information on either option, refer to the IBM information kernel :
    http://www-01.ibm.com/software/webservers/appserv/was/library/
20. Click the Next clitoris .
    
21. On Plug-in Configuration Summary, review the data for accuracy .
22. Click the Configure > button .
    
23. On Plug-in Configuration Result, affirm that the shape completed successfully. If necessity, follow the instructions to correct any errors .
24. Click the Finish button .
    
25. On WebSphere Customization Toolbox, with the Web Server Plug-in Configurations pill selected, verify that the server definition exists .

3.12 Setting the HTTP Server Properties

To use IBM WebSphere Application Server 8.5 properly with Oracle JD Edwards EnterpriseOne, you must set the HTTP server to mechanically generate and propagate the circuit board. These steps briefly describe this process .

1. Log into the admin console for IBM WebSphere Application Server
2. blue-ribbon Servers > Server Types > Web Servers .
3. Select your vane waiter .
4. On the right hand side of the sieve, select Additional Properties > Plug-in properties .
   
5. Make any necessary changes and ensure the checkboxes are selected future to these two properties :
   • automatically generate the circuit board shape file
   • mechanically propagate circuit board shape file
6. Click Apply .
7. Click the Save button to save all changes .

3.13 manually Generating a circuit board

occasionally, you may to manually generate the web waiter circuit board. The most common error that requires manual circuit board coevals is the “ HTTP 404 ” when trying to access the software. This section briefly explains how to manually generate the circuit board .

1. Log in to the WebSphere Application Server Administration Console for your profile .
2. Select Server Types > Web Servers .
   
3. Check the box next to the web server definition .
4. Click the Generate Plug-in button .
5. Click the Propagate Plug-in push button .
6. Log off of the Admin Console .

note :
Federated ( Clustered ) Web Servers. If you are using WebSphere Application Server and running JD Edwards EnterpriseOne as part of a federated (or clustered) web server, you may need to regenerate the WebSphere global plugin configuration after deploying the newest tools release. This is required when new servlets have been added to the tools release you are deploying.
If you are using WebSphere Application Server and running JD Edwards EnterpriseOne as part of a federate ( or clustered ) web server, you may need to regenerate the WebSphere global plugin shape after deploying the newest tool release. This is required when new servlets have been added to the tools acquittance you are deploying. To update ( regenerate ) plugins, refer to the pursue operation .
To update ( regenerate ) and propagate the global web server plugin configuration :

1. Log on to the Deployment Manager Administration Console using the Dmgr01 profile .
   
2. Expand the Environment node and choice Update global Web server circuit board configuration .
3. Review the message in the right acid and note the location of the circuit board file in the description. For example, the description might say :
   The ball-shaped plugin-cfg.xml file is placed in the % was_profile_home % /config/cells directory .
4. Click the OK clitoris .

3.14 Manually Editing the HTTP Configuration File

caution :
You must perform this step in order for JD Edwards EnterpriseOne HTML Server to work correctly. You must perform this step in order for JD Edwards EnterpriseOne HTML Server to work correctly. To manually edit the HTTP configuration file ( httpd.conf ) :

1. Locate your httpd.conf file. typically the file is located in this directory :
   Z:\IBM\WebSphere\HTTPServer\config
2. Open the charge with an ASCII editor program .
3. Assuming the localization of your httpd.conf is that shown in the previous step, add the following lines to the bottomland of the file :
   LoadModule was_ap22_module "Z:\IBM\WebSphere\Plugins\bin\32bits\mod_was_ap22_http.dll"

   Read more: How to Sync a PS4 Controller | Digital Trends

   WebSpherePluginConfig "Z:\IBM\WebSphere\Plugins\config\webserver1\plugin-cfg.xml"

4. Save and close the httpd.conf file .
5. Stop and restart HTTP Server from the Windows Services panel .

informant : https://thefartiste.com
Category : Tech