How to Configure Static IP on Windows Server 2019

Introduction

In this tutorial, we will learn to configure a static IP address on Windows Server 2019. It may be possible that your Windows Server Ethernet arranger is configured to obtain an IP address from a DHCP server. In some networks, there may not be a DHCP waiter running on the net, hence the necessitate for assigning a electrostatic IP arises. In this tutorial, we will learn how to configure inactive IPv4 and IPv6 address on a Windows Server 2019 .

Prerequisites

  • Cloud VPS or Dedicated Server with Windows Server 2019 installed.
  • You must be logged in via Remote Desktop Protocol as an administrative user.

Step 1: Log in to Windows using RDP

To follow this tutorial, you need to connect to your Windows Server using RDP. You can follow these tutorials for the same .

Step 2: Open Ethernet Adapter Properties

To open your Ethernet Adapter Setting, cluck on Control Panel in the Windows depart menu. Under Control Panel, click Network and Internet and then click on Network and Sharing Center .
Under Network and Sharing Center click on Change Adapter Settings on left side pane. It will open the list of attach network adapters on your system.

On Ethernet, make a right click and pawl on Properties to open settings for that particular arranger .
enter image description here

Step 3: Find the Static IP of Your Server

Snel customers can find the IP cover attached to their waiter by going to My.snel.com client area for the VPS or Dedicated Server. Click on Network tab >> Interfaces .

It will show you both the IPv4 and IPv6 address of interfaces attached to your waiter .
enter image description here
In the above screenshot note down the come as we will need it in Step # 4 of the tutorial .
Number 1 is the IP address of the interface. In the above example, the example IPv4 address is 192.168.0.2. The subnet mask would be 255.255.255.0 and the default gateway would be 192.168.0.1 .
Number 2 is the first DNS resolver waiter and similarly, number 3 is the second DNS resolver server .
If you are uncertain about these values, feel free to contact our support team .

Step 4: Configure Static IPv4 Address

Under Properties for the Ethernet arranger, click once on Internet Protocol Version 4 (TCP/IPv4) to select this option. now, suction stop on properties to open IPv4 configuration .
wyNgqI5
now, select the radio receiver button saying Use the following IP address and put the IP address we noted down in Step # 3 of the tutorial .
similarly, besides select the radio button Use the following DNS server addresses and put the address of the DNS resolver servers we obtained from Step # 3.

JqBuyY4
once done, chink OK button to save the shape .

Step 5: Obtain IPv6 Address

Snel customers can find the IPv6 address attached to their server by going to Snel control jury for the VPS or Dedicated Server. Click on Network tab >> Interfaces .

It will show you both the IPv4 and IPv6 address of interfaces attached to your server .

In the above screenshot note down the following as we will need it in Step # 6 of the tutorial .
Number 1 is the IPv6 address of the interface. In the above exercise, the example IPv6 address is fc00:1234:abcd:12ab::236. The subnet masquerade duration would be 48 and default gateway would be fc00:1234:abcd::1 .
Number 2 is the first IPv6 DNS resolver waiter and similarly, phone number 3 is the second IPv6 DNS resolver waiter .
If you are diffident about these values, feel free to contact Snel Support .

Step 6: Configure Static IPv6 Address

Under Properties for the Ethernet adapter, chatter once on Internet Protocol Version 6 (TCP/IPv6) to select this option. now, suction stop on properties to open IPv6 configuration .
2krDK0I
Under IPv6 configuration, select the radio button saying Use the following IPv6 address and put the IP address we noted down in Step # 5 of the tutorial.

similarly, besides select the radio clitoris Use the following DNS server addresses and put the address of the DNS resolver servers we obtained from Step # 5 .
TN9gQqL

Conclusion

In this tutorial, we looked at how to configure static IPv4 on Windows Server 2019. We looked at how to obtain the IP address assigned to the Snel Server. We besides learned to configure static IPv6 on a Windows Server 2019 .

generator : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.