IOGEAR GWU637 Ethernet-2-WiFi Universal Wireless Adapter User Manual – Manuals+

User Manual Ethernet-2-WiFi Universal Wireless Adapter GWU637
PART NO. M1357

www.iogear.com Designed in California, USA ©2015 IOGEAR® All rights reserved. ATEN is a registered trademark of ATEN International Co., LTD. All other trademarks are the properties of their respective owners. reproduction in solid or in part without permission is prohibited. Tested to Comply With FCC and CE Standards. FOR HOME OR OFFICE USE. Mac and the Mac logo are trademarks of Apple Computer, Inc. registered in the U.S. and other countries. Specifications capable to change without notice .

package Contents

1 x GWU637 Ethernet-2-WiFi Universal Wireless Adapter
1 x USB Power Cable
1 x USB Power Adapter
1 x Ethernet Cable ( 3ft )
1 X Quick Start Guide
1 x Warranty Card

hardware Requirements

  • Ethernet enabled device
  • Wireless Router with WPS Setup or Wireless Router without WPS Setup and Ethernet enabled Computer

overview

1. Wi-Fi Protected Setup ( WPS ) Button
– Push and hold the WPS button for 3 – 5 seconds to enable the WPS feature.
2. Micro USB Port
3. Ethernet Port
4. Reset Button
– Push and hold the readjust button for 3 – 5 seconds to reset adapter to factory default option settings .

LED Indicators

5. WPS/Reset
a. solid -­ The unit is being reset to factory default settings
b. Blinking ­- The WPS feature is enabled and active
c. Off ­- The WPS feature is not active

6. WLAN
a. Blinking ­- WLAN is transmitting or receiving data
b. Off ­- WLAN is off 7. Ethernet
a. Blinking ­- Data is being transmitted or received from connected Ethernet device
bel. Off -­ No active connection

Setting Up Your Ethernet-2-WiFi Universal Wireless Adapter

Wireless Configuration Using Wi-Fi Protected Setup (WPS)

  1. Power on your Ethernet-2-WiFi adapter by connecting the included micro-USB cable to the USB power adapter and plugging into an available power outlet.
  2. Refer to your wireless router’s user manual for instructions to enable Wi-Fi Protected Setup.
  3. Once your router enters into WPS pairing mode, press the WPS button on the Ethernet-2-WiFi adapter within two minutes to connect the adapter to your Wi-Fi network.
  4. After the WPS/Reset and Ethernet LED indicators turn off, the WLAN LED will begin blinking, indicating the Wireless Protected Setup is complete and has successfully connected the adapter to your wireless network.
  5. Use the included Ethernet cable to connect the Ethernet-2-WiFi adapter to your Ethernet enabled device such as a Blu-Ray player, HDTV or game console.

note : Make certain to set your Ethernet device ’ second network association setting to WIRED for proper operation .

wireless Configuration – Windows

1. Start by disabling your personal computer ’ sulfur radio connection.
2. following, power on your Ethernet-2-WiFi arranger using either of the pursue methods :

  • Connect the included micro-USB cable to the USB power adapter and plug into an available power outlet. Connect the micro-USB cable to the Ethernet-2-WiFi adapter.
  • Connect the included micro-USB cable to the Ethernet-2-WiFi adapter and plug into an available USB port on your computer.

note : It will take approximately 20 – 30 seconds to complete the boot-up succession. When complete, the WLAN LED will blink to show it ’ s ready to be configured. 3. Connect one end of the included Ethernet cable to the Ethernet-2-WiFi adapter. Connect the other goal of the Ethernet cable into the Ethernet larboard on your personal computer. 4. Open Control Panel and choice Network and Sharing Center. note : Windows 10 users need to select Network and Internet settings before arriving at Network and Sharing Center. 5. Click on Ethernet. 6. choice Properties. 7. Click to highlight Internet Protocol Version 4 (TCP/IPv4) and blue-ribbon Properties.

8. Choose Use the come IP address. Enter 192.168.1.253 in the IP Address sphere and 255.255.255.0 as Subnet mask. Click OK to continue. 9. Open an Internet Browser and figure 192.168.1.254 in the address bar.

10. Enter the follow factory default User Name and Password : User name : admin
Password : admin
Click the Log In button. 11. The Ethernet-2-WiFi configuration utility will launch in your browser. following, cluck Search to select the radio receiver network to connect the adapter to. 12. The Wireless Site Survey window will open. Select the desire radio net to connect to and click Done. 13. If your radio network is secured, choose the right Encryption type from the dropdown menu and enter your network password. Click the Apply button to save settings.

14. Click the Finish button to reflect the update settings. 15. The arranger will reboot for 90 seconds. During the boot summons, the Wireless Connection status will change to ACTIVE.

16. Close your browser and change the net settings on your computer bet on to DHCP. Refer to steps 4 through 8. 17. Your Ethernet-2-WiFi arranger configuration is complete. Use the admit Ethernet cable to connect the adapter to your Ethernet enabled device such as a Blu-Ray musician, HDTV or game console. note : Make sure to set your Ethernet device ’ sulfur network connection setting to WIRED for proper operation .

wireless Configuration – MAC

1. Start by disabling your MAC ’ south wireless joining.
2. future, ability on your Ethernet-2-WiFi adapter using either of the comply methods :

  • Connect the included micro-USB cable to the USB power adapter and plug into an available power outlet. Connect the micro-USB cable to the Ethernet-2-WiFi adapter.
  • Connect the included micro-USB cable to the Ethernet-2-WiFi adapter and plug into an available USB port on your computer.

note : It will take approximately 20 – 30 seconds to complete the boot-up sequence. When accomplished, the WLAN LED will blink to show it ’ s ready to be configured.

3. Connect one end of the admit Ethernet cable to the Ethernet-2-WiFi adapter. Connect the other end of the Ethernet cable into the Ethernet port on your MAC. 4. overt System Preferences from the Dock. 5. choice Network. 6. blue-ribbon Ethernet in the leave acid and choose Manually from the Configure IPv4 dropdown menu. Enter 192.168.1.253 in the IP Address field and 255.255.255.0 as Subnet Mask. Click the Apply push button.

7. Open an Internet Browser and accede 192.168.1.254 in the address bar. 8. Enter the follow factory default User Name and Password : User name : admin
Password : admin
Click the Log In button. 9. The Ethernet-2-WiFi configuration utility will launch in your browser. adjacent, click Search to select the wireless network to connect the adapter to. 10. The Wireless Site Survey window will open. Select the hope radio net to connect to and click Done. 11. If your radio network is secured, choose the right Encryption type from the dropdown menu and enter your network password. Click the Apply button to save settings. 12. Settings will save. Click the Finish push button to reflect the update settings. 13. The adapter will reboot for 90 seconds. During the boot process, the Wireless Connection condition will change to ACTIVE. 14. Close your browser and change the network settings on your computer back to DHCP. Refer to steps 4 through 6. 15. Your Ethernet-2-WiFi arranger shape is complete. Use the include Ethernet cable television to connect the adapter to your Ethernet enabled device such as a Blu-Ray musician, HDTV or plot console table. note : Make sure to set your Ethernet device ’ sulfur network connection setting to WIRED for proper operation .

conformity information

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. process is topic to the following two conditions :
( 1 ) This device may not cause harmful interference,
and
( 2 ) this device must accept any intervention received, including noise that
may cause undesired process. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide fair auspices against harmful intervention in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord with the instructions, may cause harmful hindrance to radio communications. however, there is no guarantee that hindrance will not occur in a particular facility. If this equipment does cause harmful hindrance to radio or television receiver reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the intervention by one of the follow measures : – Reorient or relocate the receive antenna.
– Increase the interval between the equipment and receiver.
– Connect the equipment into an exit on a tour different from that to which the
receiver is connected.
– Consult the principal or an experience radio/TV technician for avail. FCC Caution : any changes or modifications not expressly approved by the party responsible for conformity could void the user ’ s authority to operate this equipment.

This transmitter must not be co-located or operate on in conjunction with any early antenna or transmitter. FOR MOBILE DEVICE USAGE ( > 20cm/low power )

radiation photograph affirmation :

This equipment complies with FCC radiation sickness exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE ( WLAN DEVICES ) note : The nation code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US process channels only .

CE complaisance

This device has been tested and found to comply with the following European Union directives : electromagnetic Capability ( 2004/108/EC ), humble Voltage ( 2006/95/EC ) and R & TTED ( 1999/5/EC ) .

IC conformity

This device complies with Industry Canada license-exempt RSS standard ( south ). operation is capable to the following two conditions :
( 1 ) This device may not cause noise,
and
( 2 ) this device must accept any hindrance, including intervention that may cause undesired process of the device. IC ID : 8740A ( GWU637 )

express Warranty

Warranty information

This product carries a 1 year Limited Warranty. For the terms and conditions of this guarantee, please go to http : //www.iogear.com/support/warranty Register on-line at hypertext transfer protocol : //www.iogear.com/register authoritative Product Information
Product Model _____________________
Serial Number _____________________

WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make certain you :

  1. Visit www.iogear.com for more product information
  2. Visit www.iogear.com/support for live help and product support

19641 Da Vinci,
Foothill Ranch, CA 92610
www.iogear.com
iogear.custhelp.com
[ electronic mail protected ]

Documents / Resources

References

source : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.