Installing Plugable USB-Ethernet Drivers in Windows 10

**This is a legacy article from 2015. Please see notes for important information on changes. Update: A Windows 10 driver now exists for the USB2-E1000. however, it will not appear in the four hundred that comes with the adapter until the adjacent batch of adapters is shipped. The update driver can be downloaded from this link : Windows 10/8/8.1, 7, Vista, and XP drivers for USB2-E1000. If you are not able to connect to the Internet without installing the driver, you can download it onto a flash drive on another computer and use that to install it. In testing Plugable ’ sulfur USB-Ethernet adapters with Windows 10, we were happy to discover they all work successfully when their drivers are by rights installed. however, an initiation problem could cause issues with the USB2-E1000.

Drivers are already built into Windows 10 for : the ASIX AX88772 chip in our :

  • The ASIX AX88772 chip in our USB2-E100 and USB2-OTGE100 adapters
  • The ASIX AX88179 chip in our USB3-E1000, USBC-E1000, and USB3-HUB3ME*.

*Note In 2017, our USB3-HUB3ME was redesigned to include a Realtek RTL8153 chipset and drivers. Windows 10 should automatically configure these drivers when you plug the adapter in.) When you insert these adapters into a USB port, the drivers should automatically install with no motivation for an internet connection. however, the driver for the ASIX AX88178 chip in our USB2-E1000 is not pre-installed in Windows 10, and we have discovered a trouble with the downloadable driver that keeps it from installing. If this happens, the arranger will show up in Device Manager as “ AX88178 ” with a Code 28 erroneousness : “ ” Drivers for this device are not installed. ”

There are several ways to work around this return, depending on the scenario :

1. Upgrading from Windows 7 or Windows 8.1 : If you have already installed the driver for the USB2-E1000 in Windows 7 or 8.1 and upgrade directly from that version to Windows 10, the presently installed driver will be available to Windows 10, and your arranger should work without any far feat. If you haven ’ deoxythymidine monophosphate yet installed this driver, please install it before upgrading.

The easiest means is to establish an internet connection, either wirelessly or through another Ethernet larboard, then chew in the USB2-E1000. Windows Update should see it and mechanically download the correct driver. You can besides download and install the driver from our web site or from the harrow that came with your arranger.

2. Doing a clean install of Windows 10 or using the USB2-E1000 on a new Windows 10 computer : Since the previous Windows 7 or 8.1 driver will not be carried over to a clean install of Windows 10, it must be impertinently installed. The only way to accomplish this is to have an internet connection available when you first plug in the USB2-E1000.

That will allow Windows Update to download and install the driver. If you are in a site where this is not potential, we recommend delaying the update until an internet connection is available, or until this topic has been fixed. presently, the driver on the Plugable and ASIX websites is not working with Windows 10.

If you ’ re a drug user of a Plugable USB-Ethernet arranger and are experiencing issues, we ’ re here to help ! If support is needed, please run our PlugDebug joyride found HERE to collect system logs, and send the resulting file to support@plugable.com along with a description of the demeanor you ’ re feel and any extra details you feel are relevant .

reservoir : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.