Thefartiste – Blog reviews everything Thefartiste.com is a website that reviews and synthesizes knowledge and the most attractive and cheap quality products to our readers.
This article will explain the routine for setting up a VPN server in Windows Server 2008. The VPN protocol used will be PPTP ( Point to Point Tunneling Protocol ). The method outlined here uses an environment consist of an active directory server, a DHCP server, few workstation PCs and a VPN server. shape of the VPN server alone is explained in the follow steps
The network topology used in this frame-up is shown below
Configure IP addresses on the VPN Server
The VPN server will have two interfaces, private and populace with the following IP shape
private
IP address – 10.0.0.1
Subnet Mask – 255.0.0.0
Preferred DNS – 10.0.0.2 ( Assuming DNS runs on the Active Directory Server )
populace
Obtain the public IP data from your ISP ( Internet Service Provider )
Join the VPN server to the domain
right Click calculator – > Properties – > Change Settings – > Change – > Select Domain and enter your world identify you ’ ll be asked for credentials enter them besides and boot .
Install Network Policy and Access Server Role
Login to the VPN server as the administrator, go to Start – > administrative Tools – > Server Manager. Click Add Roles and Check “ Network Policy and Access Server ”
In the function services segment check “ Routing and Remote Access ”
Confirm your selections and install .
Configure Routing and Remote Access
After initiation Go to Start – > Run and type rrasmgmt.msc. In the console table that opens right click your waiter mention and click “ Configure and Enable Routing and Remote Access ”
In the Wizard that appears pawl Next and Select Custom Configuration
Read more: Download XAMPP for Windows – Free – 8.1.0
Select the Check Box VPN access
Click Next – > Finish. In the message corner that appears click “ Start Service ”. If you have a DHCP server configured in the network in the lapp subnet you can go ahead with the concluding mistreat .
Networks which have a DHCP waiter in a different subnet, should have the DHCP relay agent configured. Expand IPv4 – > right suction stop DHCP relay agent and go to properties
In the window that appears enter the IP savoir-faire of the DHCP server. The appropriate DHCP telescope should be configured in the DHCP waiter .
If your network doesn ’ thyroxine have a DHCP server the VPN server itself can assign IP addresses to VPN clients. Right click your Server name – > properties – > IPv4 tab – > choice “ static address pool ” – > cluck Add. Enter the begin and end IP ranges .
Allow users to login via VPN
On the Active Directory Server go to Start – > administrative Tools – > Active Directory Users and Computers – > Right Click the properties of an exploiter – > Dial-In pill and chatter “ Allow access ”
Setup a VPN connection on the remote client PC
On the VPN customer personal computer go to start – > Run and type ncpa.cpl, open “ New Connection Wizard ”, in the charming that appears snap adjacent and choose “ Connect to the network at my workplace ”
In the adjacent footprint select Virtual Private Network Connection .
Enter a company mention which is used to name the joining and in the final mistreat enter the IP address of the PUBLIC IP address of the VPN server. After the connection is created enter the username and password of a drug user in the active voice directory database and chink plug in .
