Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media – Oracle® Server X5-2 Installation Guide for Windows Server Operating Systems

    This operation describes how to boot the Microsoft Windows Server 2012 or 2012 R2 operating arrangement from local or remote control media. It assumes that you are booting the Windows initiation media from one of the postdate sources : Note –  The Windows Server 2012 or 2012 R2 ISO effigy can be used for remote control initiation or for creating an installation four hundred or DVD. If you are booting the installation media from a PXE environment, see install Windows Server 2012 or 2012 R2 Using PXE Network Boot for instructions .

  1. Ensure
    that the installation
    media is available to boot.

    For extra information about how to set up the initiation media, see Selecting the Boot Media Option .

  2. Reset or power on the server.
    For exercise, do one of the succeed :

    • From the local server, imperativeness the Power clitoris ( approximately 1 second ) on the front panel of the waiter to power off the waiter, then press the Power push button again to baron on the waiter .
    • From the Oracle ILOM web
      interface
      , click Host Management → Power Control, choose Reset from the Select Action list box, then click Save .
    • From the Oracle ILOM CLI, type : reset /System

    The server begins the boot process and the BIOS screen appears .

    image:Graphic showing BIOS Screen.
    Note –  The adjacent consequence occurs identical cursorily ; consequently, focused attention is needed for the succeed steps. Watch cautiously for these messages as they appear on the blind for a brief time. You might want to enlarge the size of your screen to eliminate coil bars .

  3. In the BIOS screen, press the F8 key to specify a temporary boot device for the Windows
    OSinstallation.

    [Boot Pop Up Menu Selected] appears at the bottom of the BIOS screen, and then the Please Select Boot Device menu appears. The screen that appears will be different depending on whether you have the UEFI/BIOS Boot Mode configured for Legacy BIOS or UEFI .

    • For Legacy BIOS modality, a shield alike to the postdate appears :

      image:Please Select Boot Device menu in Legacy BIOS                                         mode.
    • For UEFI mode, a blind like to the play along appears :

      image:Please Select Boot Device menu in UEFI mode

    Note –  The Please Select Boot Device menu that appears in your facility might differ depending on the character of disk accountant and early hardware, such as PCIe network cards, installed in your server .

  4. In the Please Select Boot Device menu, select the menu item according to the Windows media
    installation method and UEFI/BIOS boot mode you elected to use, then press
    Enter.

    For model, If you elected to use the Oracle ILOM Remote System Console Plus application rescue method, blue-ribbon USB:VIRTUAL: Remote Iso CDROM2.04 from the Legacy BIOS Boot Mode screen or [UEFI]USB:VIRTUAL: Remote
    Iso CDROM2.04
    from the UEFI Boot Mode screen .
  5. If prompted with Press
    any key to boot from CD
    , press any key.

    The Windows initiation sorcerer starts and the Loading Files screen appears .

    image:Loading files screen.
    The Windows facility sorcerer continues until the Language Localization dialogue appears .

    image:Language localization screen.
  6. Select your language and

    other preferences, then
    click Next to continue.

    The Install immediately screen appears .
    Note –  The Install nowadays screen allows you to continue the installation or access an optional Repair menu ( see lower entrust of the screen ) for troubleshooting .

    image:Install now screen.

  7. Click Install now.
    The Setup Is Starting screen appears .

    image:The Setup is starting screen.
    then the Select the Operating System dialogue appears .

    image:Operating system selection screen.
  8. In the Select Operating

    System dialog, select
    the desired operating system, then click Next to
    continue.

    For most installs, choice Windows Server 2012 ( or 2012 R2 ) Datacenter ( Server with GUI ) at the bed of the number .
    For more information on the different types of Windows operating systems, see the Windows Server 2012 or 2012 R2 documentation at hypertext transfer protocol : //technet.microsoft.com/en-us/windowsserver/default.aspx .
    The License Terms blind appears .

    image:License terms screen.

  9. In the License Terms screen,
    check the I accept the license terms box, then
    click Next to continue.

    The Which Type of Installation Do You Want dialogue appears.

    image:Which type of installation do you want? screen.

  10. For all new installations, in
    the Which Type of Installation Do You Want dialog, click Custom:
    Install Windows only (advanced)

    The Where Do You Want to Install Windows dialogue appears .

    image:The Where do you want to install windows? screen.
  11. In the Where Do You Want to Install Windows dialog, perform one of the
    following tasks:

    • ( This task merely applies to Windows Server 2012 installations ) If you do not see any storehouse targets listed and have a Oracle Storage 12 Gb/s SAS PCIe HBA External card configured on your server, chink Load Driver to display the Load Driver dialogue, then proceed to Step 12 .
    • If you see the storage prey where you want to install the operate system but want to change the default option partition settings associated with that target, select the target, cluck Drive Options ( Advanced ), then proceed to Step 13 .
    • If you see the storage target where you want to install the operate arrangement and do not want to change the default option partition settings for that prey, select the target and chatter Next, then proceed to Step 14 .
  12. In the Load Driver dialog, do the following:

    image:The Select the Driver to be Installed screen.

    1. Ensure that the drivers are accessible according to the
      installation method chosen (described in Selecting the Boot Media Option).

      For exercise :

      • storehouse drivers are on a harrow mounted as a device from the distant comfort .
      • memory drivers are on a local forcible storage media, such as the Oracle System Assistant USB dart drive ( if installed ), which is mounted internally in the server ’ south chassis ; a CD/DVD ; or virtual media mounted from the distant console .
    2. In the Load Driver dialog, click Browse to navigate to the
      appropriate driver media folder as described below.

      • For a system configured with the Oracle Storage 12 Gb/s SAS PCIe HBA External option, navigate to the pursue directory on the internal Oracle System Assistant USB flash drive to load the appropriate driver : Windows/2012/Drivers/LSI-HBA-MPT3 .
    3. In the Browse for Folder dialog, select the appropriate driver,
      then click OK to load the driver.

      The selected driver appears in the Select the Driver to Install dialogue .
      For exemplar :

      image:Windows Server 2012 non-RAID HBA driver                                         screen.
    4. In the Select the Driver to Install dialog, click Next to install
      the driver.

      The Where Do You Want to Install Windows dialogue appears .
      Note –  If you previously removed or unmounted the Windows Server install media to load the drivers from the internal Oracle System Assistant USB flare drive, you might see the comply message : Windows Cannot be installed to this
      disk.
      If this message appears, insert or re-mount the Windows install media, then pawl Refresh .
    5. In the Where Do You Want to Install Windows dialog, do one of
      following:

      • Select the storage target listed and click Next to install the operational system, then proceed to Step 14 .
      • If any partitions exist on your target magnetic disk, it is recommended that you allow the frame-up process to create the appropriate partitions. To delete preexisting partitions, proceed to Step 13 .
  13. (Partition Drive, advanced) In the lower portion of the Where Do You Want
    to Install Windows dialog, do the following:


    image:The Where do you want to install windows? screen.

    1. Click Delete to delete the selected storage target existing
      partition configuration.

      A confirmation window appears
    2. Click OK to confirm the partition deletion.
    3. If any additional partitions exist on the target disk, repeat Step
      a and Step b.
  14. Select (highlight) the disk to
    which you want to install Windows, then click Next.

    The Installing Windows blind appears .

    image:The Installing Windows screen
    The apparatus and facility process begins and files are copied to the prey .
    The Windows Needs to Restart to Continue screen appears .

    image:The Windows needs to restart to continue screen.
    The system reboots .
  15. After the system reboots, wait while the Getting Devices Ready screen appears and the Windows
    Installation Wizard configures the device settings.


    image:The Getting devices ready screen.
    After the devices are configured, the system reboots again and the Settings blind appears .

    image:The Settings screen.
  16. Enter the Administrator user
    name and password, then click Finish.

    The Finalizing Your Settings screen appears .
    This screen indicates that the Windows OS has been installed.

    image:The Finalizing your settings screen.

  17. After the installation completes,
    type Ctrl+Alt+Delete to log in.

    The Administrator login screen appears .

    image:The Administrator log in screen.
  18. Enter the Administrator password,
    then click the arrow to log in.

    The Windows Server background appears .
    This completes the initiation .
  19. Proceed to Post Installation Tasks for Windows Server and perform the post installation
    tasks.
source : https://thefartiste.com
Category : Tech

About admin

I am the owner of the website thefartiste.com, my purpose is to bring all the most useful information to users.

Check Also

articlewriting1

Manage participants in a zoom meeting webinar

Call the people who attend the meet as follows Alternate host host Who scheduled the …

Leave a Reply

Your email address will not be published.